X6 Charger Not Supported btemp resistor location
Showing posts with label x6. Show all posts
Showing posts with label x6. Show all posts
Friday, April 17, 2015
Nokia X6 Charger Not Supported Solution
Heres a solution that shows the location of BTEMP resistor that caused Charger Not supported on Nokia X6 if damaged. This components needs to replace if cahrger not supported shows on the LCD screen display when the battery charger is being plug-in.
This Btemp resistor rated value is 47K. You may easily find it on other non working Nokia PCB board.
Saturday, April 4, 2015
Nokia X6 Digital Mic mouthpiece microphone problem Solution
Heres the solution that might possibly help solve Nokia X6 mouthpiece microphone failure, a problem that no audio sounds can be heard from the other receiving device during a call is created.
The red lines indicated in the solution above is the microphones supply voltage if this voltage is cut or not present the mic will not tend to work. There are also resistors that where the digital audio signal is flow across to this components that has a resistance value of 100ohms each, check and replace it first before attempting to replace the Digital Microphone Module.
Nokia X6 Microphone sound failure solution
Wednesday, April 1, 2015
Nokia X6 Bluetooth WLAN and GPS solution hardware repair solution
Bluetooth, Wireless LAN and GPS connection problem can be cause by a firmware failure and can be easily be fix by restoring, updating or flashing the phones firmware again. But after doing any firmware repair and the problem still exists the problem may certainly lies on the hardware components failures.
This solution below may possibly useful and help fix and repair Nokia X6 Bluetooth, WLAN and GPS problem issues for it shows the Bluetooh, WLAN and GPS component circuit.
Repair Hints: Ensure that the firmware of the device is successfully calibrated, upgraded and restored.
1) Check all corresponding supply voltages in the circuit
2) Check the RF buffer clock feeds from the RF circuit
3) Check the Bluetooth and WLAN antenna
4) Rework the Bluetooth IC first, the WLAN will not work if the Bluetooth IC is faulty.
This solution below may possibly useful and help fix and repair Nokia X6 Bluetooth, WLAN and GPS problem issues for it shows the Bluetooh, WLAN and GPS component circuit.
Nokia X6 Bluetooth, Wireless LAN and GPS solution
1) Check all corresponding supply voltages in the circuit
2) Check the RF buffer clock feeds from the RF circuit
3) Check the Bluetooth and WLAN antenna
4) Rework the Bluetooth IC first, the WLAN will not work if the Bluetooth IC is faulty.
Subscribe to:
Posts (Atom)