Showing posts with label c1. Show all posts
Showing posts with label c1. Show all posts

Sunday, April 19, 2015

Nokia C1 01 network problem solution jumper ways

Nokia C1-01 no signal, Nokia C1-01 not network, Nokia C1-01 low signal problem can be solve with these few steps that I am going to post in this post. So keep reading and look at the diagram bellow for network solution in Nokia C1-01.Nokia Asha 300 Keypad Not Working Problem Solution Jumpers
Nokia C1-01 network problem solution jumper ways
To solve signal problem in Nokia C1-01 look at diagram above and in it you can find some parts that are identified with red lines, Clean these parts with electronics cleaner and apply some heat so that they can be dry.
Do nto apply much heat because it can harm your skin and may can damage the motherboard of Nokia C1-01.
Check antina points also in the housing (casing) and also apply jumper to short antina that is used for external antina attachment in Nokia C1-01.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »

Saturday, April 4, 2015

Nokia C1 01 microSD Memory Card MMC not detected solution

This solution below can be used to fix Nokia C1-01 microSD memory card not detected problem issues, this problem may possibly occurred if the device suffered wet or water damaged. If this happens the Nokia C1-01 will not been able to detect any microSD memory card that inserted to it and it shows on the display the "NO memory card is inserted or memory card not detected".

The solution below below shows the location of certain component that needs to be check or replace to solve nokia C1-01 memory card not detected issues.




Nokia C1-01 microSD Memory Card Not detected
nokia C1 MMC IC jumper ways
The Nokia C1-01 MMC IC is located and mounted just besides the microSD slot. By replacing the MMC IC will possibly fix a damaged Nokia C1-01 that does not accept or read any microSD memory card.
Read more »

Friday, April 3, 2015

Nokia C1 01 LCD Screen Display Problem Jumper Ways Solution

 Nokia C1-01 LCD Screen Display Problem Jumper Ways & Tracks
This is the Nokia C1-01 Solution for an abnormal display problem, such as blank or empty screen, garbled or dark screen  display. This solution may works if you already tried installing a new LCD screen module and tried updating the device firmware but still the screen went wrong.

Refer to the solution below and do trace the LCD soldered pads connector down to the corresponding components such as the resistors and filter coils. The resistors has as resistance value of 22o ohms each. The VAUX is 2.8 volts and the VIO is 1.8 volts, you may also check these voltages.
This also includes the connection line paths of the LCD backlight LED, to fix if the white LED at the back of the LCD doesnt turns ON and shows a dark display.


Read more »